 |
 |
 |
|
| |
| |
 |
Page Three Text
View Page 2 Products
 |
| K7B Abrasive Cut-off Saw , 7" abrasive Wheel |
Handles 1" solid round, 2" pipe.
Adjustable work length stop and down stop furnished. Optional steel stand #12P
1/2" wheel arbor, 7"diameter abrasive wheel. 1 hp TEFC motor 1 ph (110,220 volt)
Dimensions - L 22" x W 10" x H 14"
Please specify voltage. With cord and switch.
Less abrasive wheel. 75 lbs. Spindle RPM - 4800.
Model: K7B
view larger picture |
 |
| K8B Abrasive Cut-off Saw, 8" Abrasive Wheel |
More capacity, cuts 1-1/2" solid, 2" pipe.
1/2" wheel arbor. 8" diameter abrasive wheel
Spark deflectors, front and rear, standard. Optional steel stand #12P
Dimensions - L 22" x W 10" x H 14", 90 lbs.,Spindle RPM 4900
3 HP TEFC motor, 1 PH (110/220V) or 3 PH (220/440V)
Please specify voltage. With switch; less abrasive wheel.
Model: K8B-1 3 hp, 1 ph.
Model: K8B-3 3 hp, 3 ph.
view larger picture |
 |
| K10B Abrasive Cut-off Saw, 10" Abrasive Wheel |
Swivel cam vise opens 4" - fast, lever-lock. Work length stop.
5/8" arbor, sealed-for-life bearings,10" abrasive wheel, 3 HP
Dimensions - L 23" x W 10" x H 14"
Options: Steel stand #12P, Foot operated chain vise (in place of cam vise) #K10SSF
Optional power down feed, semi-automatic, air/oil feed. #PH-14.
Optional WET model # K10SW, coolant w/pump and tank, stand, 24 volt@ switch. 1 ph , 110/220 volt or 3 ph 110/220 volt, Please Specify when ordering.
With switch and vise, LESS ABRASIVE WHEEL
110 lbs. Spindle RPM - 3450
Model: K10B-1 3 hp 1ph 110/220
Model: K10B-3 3 hp 3 ph 220/440
Model: K10S-1 3 hp 1 ph 110/220 w/ stand
Model: K10S-3 3 hp 3 ph 220/440 w/stand
Model: K10SF-1 3 hp, 1 ph 110/220 Stand & foot operated chain vise.
Model: K10SF-3 3hp, 3 ph, 220/440 Stand & foot operated chain vise.
Model: K10SW 3 hp , 1 or 3 phase..wet with pump.
view larger picture |
 |
| K12SS Abrasive Saw, 12" abrasive Wheel | Extra heavy cast-iron base, trunnion and overarm.
Sealed ball bearings, 1" wheel arbor. 12" diameter abrasive wheel ( not included)
Positive, quick-lock swivel vise, opens 4". Optional: Foot chain vise # K12SSF
Options: PH-14 power down feed, semi-auto air/oil operation.
5HP TEFC motor,1phase 220v or 3 phase 220/440 volt. Please specify.
3450 RPM, 4400 spindle RPM.
Less abrasive wheel., Wt: 270 lbs.
Model: K12B-1 5 hp 1 ph. 220, Bench model
Model: K12B-3 5hp 3 ph. 220/440 Bench model
Model: K12SS-1 5 hp, 1 ph, 220, With Stand.
Model: K12SS-3 5 hp, 3 ph, 220/440 With Stand.
Model: K12SSF-1 5 hp, 1 ph, 220 Stand & foot chain vise
Model: K12SSF-3 5 hp 3 ph, 220/440 Stand & foot chain vise.
view larger picture |
 |
| K14B Heavy Duty Saw 14" Abrasive Wheel |
Can handle 2-1/2" solid round stock, 3" pipe with speed and efficiency
Extra-heavy cast iron base, trunnion, and arm.
Sealed ball bearings, 1" wheel arbor.Dual V-belt drive, Spindle RPM 4400.
Positive, quick-lock swivel vise, opens 4".
5 HP, TEFC 1 PH (220V only) or 3 PH (220/440V) please specify.
Dimensions - L 22" x W 14" x H 24". LESS abrasive wheel.
Model: K14B-1 5 hp 1 ph 220 Bench model , weight 210 lbs.
Model: K14B-3 5 hp, 3 ph 220/440 Bench model, weight 210 lbs.
Model: K14SS-1 5 hp 1 ph, 220, with STAND, weight 270 lbs.
Model: K14SS-3 5 hp, 3 ph, 220/440 with STAND weight 270 lbs.
Model: K14SSF-1 5 hp, 1 ph, 220, Stand & foot chain vise. 275#'s
Model: K14SSF-3 5 hp, 220/440 , Stand & foot chain vise. 275#'s
view larger picture | |
 |
| K12-14 CS Masonry Saw, 14" Diamond Wheel | Cut block, brick wet or dry with a diamond blade ( not included)
Rigid construction, wet tray with submersible pump.
Quick change legs
Replaceable spindle cartridge
Cast aluminum sliding table w/mitre gage
Locking sawhead for fixed position cutting.
1-1/2 HP, 1PH 110V
1" wheel arbor, 1100 spindle RPM
300 lbs.
Model: K12-14CS
view larger picture |
 |
| K12-14V, 12" or 14" Abrasive Wheel Vacuum Base | Models mounted on DCV-6 dust collector/vacuum.
400 CFM with hood.
Dust collector has replaceable filter element.
Manual switch on saw and dust collector.
Dimensions L 25" x W 17" x H 55"
Uses 12" or 14" abrasive wheels. 1" wheel arbor.
Available 1 PH (20V only) or 3 PH (220/440V)
Please specify. 4400 Spindle RPM.
525 lbs.
Model: K12-14V
view larger picture |
 |
K12-14MS, Metallurgical saw, 14" abrasive wheel.
Great for Met labs! Contain the dust! |
|
5 HP, 3 PH 1725 RPM TEFC motor.
External manual operation.
Dual moveable 4" screw vises.
Capacity 2-1/2" solid, 3" shapes.
Magnetic switch, low-voltage protection at switch, 24V.
Internal halogen light - 24V.
1" wheel arbor, 12" or 14" blade, (not included)
Dual coolant nozzles.
2200 spindle speed at 1725 RPM.
Flood coolant, 10 gal., 1/3 HP.
Dimensions L 39" x W 26" x H 60"
Enclosed wet cutting metallurgical saw.
Options: Power down feed #PH-14, Oscillation for large sections # OSC-14, door interlocks.
700 lbs.
Model: K12-14MS
view larger picture | |
 |
| K12-14W Wet Abrasive Cut-off Saw, 14" Abrasive Wheel | Magnetic switch, 24 volt at switch
2200 spindle speed.
1" spindle arbor.
Uses 12" or 14" abrasive wheel, not included.
Two cam lock vises.
10 Gallon coolant tank with pump and splash guard.
Heavy duty cast iron arm, trunnion. Heavy duty steel base.
Options: Power down feed, #PH-14, Oscillation # OSC-18
Work length stop. # KWL
Dimensions L 36" x W 26" x H 62", Weight: 540 lbs.
5 HP, 1 PH (220V only) or 3 PH (220V/440V), 1725 RPM motor.
Model: K12-14W.
view larger picture |
 |
| K16-18 16 or18" Abrasive Wheel Saw |
16" or 18" diameter abrasive wheel, (not included)
Rugged cast iron trunnion and arm.
Super rigid, super accurate.
Heavy-duty guards, efficient spark chute.
Fast, foot-operated chain vise.
1" wheel arbor, Sealed ball bearings, 2500 spindle RPM
Table 16" wide x 28" deep.
Capacity 3" solid, 4" pipe.
10 HP TEFC motor. 3 phase 220/440 volt, please specify.
Dimensions - L 41" x W 24" H 55"
Manual starter with overload protection.
Less abrasive wheel. Wt: 600 lbs.
Options: PH-20 power down feed, Oscillation OSC-18
Model: K16-18
view larger picture | |
 |
|
20" abrasive wheel,( not included).
Rugged cast iron trunnion and arm.
Super rigid, super accurate.
Heavy-duty guards, efficient spark chute.
Fast, foot-operated chain vise.
1" wheel arbor. Sealed ball bearings.
Table 18" wide x 30" deep.
Capacity 4" solid, 6" shapes.
2500 spindle RPM.
Optional work stop (WL-20). Optional: Power down feed # PH-20
Optional dust collector (DCV-1), Oscillation #OSC-26
Dimensions - L 41" x W 24" x H 55"
15 HP TEFC saw duty motor, 3 phase (220V)
Magnetic starter, adjustable down stop, less abrasive wheel.
Model: K20SSF-15/220 15 hp TEFC motor, MAGNETIC switch.
Model K20SSF-15/440 15 hp TEFC , 440V MANUAL switch.
Model K20SSF-20 20 HP TEFC 3 phase (220/440V) Mag.Switch
view larger picture | | >> SEE MORE PRODUCTS
Back to top |
|
|
|
| |
©
2004 By Kalamazoo Industries, Inc. All Rights Reserved.
Web Site and Data Engine Powered by ZCSS.com.
This web site is database driven and all content is inserted by
Kalamazoo Industries, Inc.
If you have questions about the content on this web site please
contact Kalamazoo Industries, Inc. .
|
|
