 |
 |
 |
|
| |
| |
 |
Page Four Text
View Page 2 Products
 |
1SM 1" Belt Sander
1/3 HP motor
1 PH, 1725 RPM
1" x 42" belt
4" contact wheel
Tilt table - vertical sander only
1800 SFPM
32 lbs
Model 1SMV - same as above plus:
Enclosed guard
DCV-4 vacuum base
95 lbs
Model: 1SM
Model: 1SMV- As above with enclosed belt guard and vacuum base
view larger picture |
|
 |
|
2FSM 2" Sander Multi-position vertical or horizontal
2" x 48" belt, Vertical or Horizontal Position.
1/2 HP motor, 3450 RPM, direct drive, 5" contact wheel
Tilt work table, removeable platen
Full hinged OSHA guard for quick belt change.
Pre-set belt tension, one knob belt tracking.
4500 SFPM belt speed, WT. 48 lbs.
Model: 2FSM
view larger picture | |
 |
Less motor
Vertical thru horizontal postitions. 2" x 48" belt
Tilt Work table
5" contact wheel
Removable platen and pulley V-belt
21 lbs
Model: 2FS
view larger picture |
 |
| 2FS72 2" belt grinder GREAT for knifemaking !! |
Less Motor, Multi-position.
Similar to the 2FS only 2" x 72" belt and 8" serrated contact wheel.
24 lbs
Model: 2FS72
view larger picture |
 |
1/2 HP motor
1ph, 3450 RPM
2"x48" belt, contact wheel, tilt table and removable platen
Full hinged osha guard for quick belt change
Variable positions
Mounted on DCV-4 dust collector 100CFM.
110 lbs
Model: 2FSMV
view larger pictur |
 |
All-purpose- for wood, metal and plastics
1/2 HP (1 HP available) 1 phase
Vertical or Horizontal position
3450 RPM
4" x 36" belt
46 lbs
Model S4
view larger picture |
 |
All-purpose- for wood, metal and plastics
1/2 HP , 1 phase. (1 HP available, #S4S-1)
Vertical or horizontal postion.
3450 RPM
4" x 36" belt with full OSHA guard
50 lbs
Model: S4S
view larger picture |
 |
| S4SV 4" sander , Dust Collector Base !! | 4" x 36" belt sander with dust collector, cord, and switch
Vertical or Horizontal position.
1/2 HP,1 phase 110 volt (1 HP available) 3450 RPM
3615 SFPM, 120 LBS.
Dimensions: 50" high x 12" deep x 14" wide
Model: S4SV 1/2 hp
Model: S4SV-1 1 hp
view larger picture |
 |
| S4SWB 4" Metallurgical benchtop belt sander | 4" x 36" wet benchtop belt sander
4" wide x 6" long platen/work area
1/2 hp, 110 vac, TEFC motor
self contained coolant tank & pump
Quick belt change, Pre-set belt tension
Dimensions: L20" x W 20" x H 12"
Model: S4SWB
view larger picture
Also available with 8" Disc & belt combo:
Model: S4SWBD WT: 130 lbs.
view larger picture
|
 |
| S460D, 4" Dry belt sander |
4" x 60" abrasive belt, direct drive, vertical position
Reversible platen 4" x 17", work table 4" x 6"
Full OSHA guard, easy belt tracking, quick belt change, pre-set belt tension.
Dimensions: L14" x W16" x H33"
Manual switch, Wt. 145. lbs.
Model S460D- 1 hp, 1 phase or 3 phase ( please specify voltage & phase)
view larger picture |
 |
| S460V, 4" belt sander with Vacuum |
4" x 60" belt
1 HP, 1 PH, or 3 PH
4" pulley, 3450 RPM, 3600 SFPM, Direct drive
Reversible platen 4" x 17"
Cast iron table 4" x 6"
Full OSHA guard, Easy tracking , Quick belt change !
DCV-6 Vacuum base 400 CFM
Dimensions: L 18" x W 26" x H 60", WT. 485 lbs.
Manual switch - please specify phase and voltage
Model: S460V
Horizontal model available :
Model: S460HV
view larger picture |
 |
| 4" x60" belt, 3 hp 1 phase or 3 phase motor, Magnetic 24 volt switch. |
Heavy stand, pre set belt tension, one lever belt change
Spindle RPM - 2800
Flood coolant - 10 gal tank, 1/3 hp pump, splash guards.
Platen - 4" x 17", work table 4" x 6"
Dimensions: L 36" x W 24" x H 63" , Wt: 485 lbs.
Model: S460W
Horizontal available:
Model: S460HW
view larger picture |
 |
Heavy Duty Direct Drive
2"x60" Belt
3HP, 1PH, 110/220 or 3PH 220/440 3450 RPM, Manual switch.
8" contact wheel-right side clear for corner sanding
5400 SFPM
2"x12"x1/2" reversible platen
Easy Tracking
2"x3" work table, dual purpose for contact wheel and top platen
Spring loaded belt tension, quick belt change
Model: BG260HS
Also available without stand
Model: BG260
view larger picture |
 |
Open area design for easy access
2" x 72" belt
Throat dimensions: H 10" x D 13"
Dimensions: L 24" x W 12" x H 24"
7200 SFPM belt speed, 5" lower contact wheel, direct drive.
Easy belt tracking
1 HP TEFC, 1 PH (110/220V) monitor , Manual switch, Wt: 80 lbs.
Model: BG272
Model: BG272S with stand ( #12P) see accessories
view larger picture |
 |
Multi purpose sander for grinding, shaping, contouring, flat work, angles, snagging and roughing (see VIEW LARGER PICTURE )
Platen rotates 360 deg. for many different shapes and styles of sanding.
Versatile for quick change contact wheel with various angles easy to change.
1HP, 3450RPM motor, available in 1ph or 3ph.
Manual switch.
5400 SFPM.
2"x72" belt.
1-1/2" and 3" contact wheels standard on machine.
5"and 8" diameter contact wheel optional. #CW5 or #CW8
8"x5" tilting cast iron table with slot.
Optional stand available.
Model: S272
view larger picture |
 |
Multi purpose sander for grinding, shaping, contouring, flat work, angles, snagging and roughing (see VIEW LARGER PICTURE )
Platen rotates 360 deg. for many different shapes and styles of sanding.
Versatile for quick change contact wheel with various angles easy to change.
L 27" x W 18" x H 40"
SFPM 5400
2" x 72" belt
Bench model
Mounted on DCV-6 dust collector
110 lbs.
Model 272S - same as above but with heavy-duty stand legs 170 lbs.
view larger picture
| >> SEE MORE PRODUCTS
Back to top |
|
|
|
| |
©
2004 By Kalamazoo Industries, Inc. All Rights Reserved.
Web Site and Data Engine Powered by ZCSS.com.
This web site is database driven and all content is inserted by
Kalamazoo Industries, Inc.
If you have questions about the content on this web site please
contact Kalamazoo Industries, Inc. .
|
|
