Belt Sanders 2

Page Fourteen Text

View Page 1 Products

S6MS,   6" belt sander
Industry standard. 3 HP !! Real workhorse !! Every shop needs one !! Also available in 5 HP and in 6" x 60" belt!

6" x 48" belt, variable positons, direct drive, 1 lever quick belt release !!!
Cast iron frame, Full OSHA safety guard, Heavy duty steel stand.
3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM
Reversible platen 6 1/2" x 14"
Cast iron work table 6" x 10" with 1/2" x 1/8" slot
Option: JIC controls

Model: S6 sander head only, less motor
Model: S6M-1 3hp, 1 phase, 220, LESS stand.
Model: S6M-3 sander, 3 hp, 3 phase, LESS stand
Model: S6MS-1 , 3 hp, 1 phase, 220 volt, w/Stand ( 110 volts @34amps)Model: S6MS-3,   3 hp, 3 phase, 220/440 volt, w/Stand
Model: S6MS-5    5 HP, 3 PH other features same as above.
Model: S660MS 6" x 60", 3 hp, other features same as above.
view larger picture

S6MV, 6" belt sander with Vacuum Base
Multi-position, vertical thru horizontal ! 3 HP! Powerful !

Belt sander with heavy-duty enclosed stand and vacuum dust collector.
6" x 48" belt ( same as S6MS). DCV-6 dust collector base, 400 cfm, panel fiter.
Quick one lever abrasive belt changing!
Reversible steel platen , cast iron frame
Dimensions: L 27" x W 18" x H 52"    Weight: 400 lbs.

Model: S6MV-1 3 hp , 1phase w/ vacuum

Model: S6MV-3  3 hp , 3 phase w/ vacuum

Also Available:
Model S660MV    6" x 60" belt, other features same as above

view larger picture

S6MW, 6" Wet belt sander

6" x 48" Wet belt sander, 3 hp, 1 phase or 3 phase motor.
Magnetic switch with 24 volt at pushbutton.
3450 prm motor w/ 2800 SFPM at belt.
Steel reverseable platen 6 1/2" x 14"
Multi-postion vertical thru horizontal, cast iron frame.
Cast Iron work table, 6" x 10" w/1/2" x 1/8" slot
1 lever quick belt change, pre-set spring belt tension.
Full OSHA guard, heavy duty base
1/3 hp coolant pump & 10 gal. tank w/ baffles.

Model: S6MW-1 3 hp , 1phase, 220 volt. WT: 475 lbs.

Model: S6MW-3 3 hp , 3 phase, 220 or 440 volt Wt: 475 lbs.

view larger picture

S660MW, 6" Wet belt sander, Horizontal/Vertical
17" long platen for long work.

3 HP, 1 PH or 3 PH, 3450 RPM
6" x 60" wet belt sander, multi-position vertical/ horizontal
Steel platen - 6-1/2" x 17", 2800 SFPM
Cast iron table with 1/2" x 1/8" slot, cast iron frame, Heavy duty base.
Quick belt release, Full safety guard.
Constant spring belt tension, FAST 1 lever belt change !!
Magnetic switch with 24 volts at control
Coolant pump and tank, 10 gal. 1/3 HP
Weight: 500 lbs.
Dimensions: 24" x 36"
Model: S660MW-1 1 Phase 220 volt
Model: S660MW-3 3 Phase 220/440 volt
view larger picture

S8, 8" belt sander HEAD
Great for special machines. Incorporate this into your unit.

8" x 60" belt sander , Head only. Belt drive ( pulley included). Air tension on belt.
8" dia. drive pulley, plate base with mounting
Model: S8H 8" x 60" sanding head only
view larger picture

S8D, 8" Vertical Dry Belt Sander
Also available WET

7-1/2HP, 3PH motor
Magnetic switch w/jog button, air belt tension 0-55 psi reqd.
1725 RPM 3500 SFPM
8"x60" belt, replaceable platen, work area 8" x13"
8"x12" cast iron table, adjustable angle, 5/8" slot for mitre gage.
645 lbs.

Model # S8D , 8" x60" Dry vertical belt sander, 220/440 3 phase

Model: # S8W, 8" x 60" Wet vertical belt sander. 760 lbs.
Wet with tank & pump, 24 volt@ pushbutton. 220/440 3 phase
view larger picture

S8HD , 8" Horizontal Dry Belt Sander (available wet)

8" x 60" belt, air tension, 0-50 PSI reqd.
7-1/2 HP, 3 PH motor
Twin V-belt drive
Replaceable platen
Cast iron table 8" x 12"
Platen working surface 8" x 13"
Dimensions: L 35" x W 24" x H 34", Weight: 900 lbs.
MODEL: S8HD , horizontal DRY sander
MODEL: S8HW, horizontal WET sander

Model: S8HD, 8" x 60" Horizontal Dry, 220/440 3 phase 60 hz.
Model: S8HW, 8" x 60" Horizontal WET. 220/440 3 ph, 24 volt@ pushbutton
With 10 gal. tank & pump.
view larger picture

S10D, 10" wide belt sander
Good for large surfaces, Available in Horizontal and WET also !!

10"x90" belt, 3400 SFPM
10HP, 3phase, TEFC motor. Magnetic controls with jog switch.
Steel platen-10"x29"
Work Surface-10"x28"
Cast Iron Table-14"x18"
Table Tilt 45 deg. down, 15 deg. up
Air Tension on Belt, 0 55 PSI Reqd.
1160 lbs.

Model: S10D: 10" x90" DRY vertical belt, 10 hp, 3 phase, 220/440/60Hz
Model: S10W: WET vertical 10"x90" belt, 10 hp, 3 ph, 24 volt@ switch
220/440 volt 60 hz., with 10 gal tank & coolant pump.
Model: S10HD: Horizontal DRY, 10"x90", 10 hp, 220/440/60Hz
Model: S10HW: Horizontal WET, 10"x90",10 hp, 220/440/60Hz
24 volts @ switch, 10 gal tank & coolant pump.
view larger picture

S14D, 14" Vertical Dry Belt Sander
Also available Wet !

14" x 103" belt
20 hp, 3 phase, 220/440/60hz
Steel platen 14-1/2 x 36"
Work surface 14" x 32"
Tilt worktable 14" x 18"
Mag controls with jog
Air belt tensioning, 0-55 PSI reqd.
3400 SFPM
L 46" x W 31" x H 84"
1750 lbs

Model: S14D, Vertical DRY, 20 hp, 3phase,220/440/60hz
Model: S14W, Vertical WET, 20 hp, 3 ph. 220/440/60hz
24 volt at switch, 10 gal coolant tank & pump.

view larger picture

S14HW, 14" Wet Horizontal Belt Sander
Also available DRY !
Great for getting parts FLAT !!

14" x 103" belt
3400 SFPM
Steel platen 14-1/2" x 36"
Work surface 14" x 32"
Air tension on belt, 0-55 PSI reqd.
20 HP, 3 PH TEFC
Mag controls with jog, 24 volts at pushbutton
L 64" x W 31" x H 35"
Wt: 1900 lbs

Model: S14HW, 14"x 103", 20 hp.,220/440/60hz 3 ph. 24 volt at switch.
10 gal. coolant tank & pump.
Model: S14HD, as above, less coolant tank & pump.

view larger picture

KS390/KS490 , 3" and 4" wide belt grinders!!
Fast metal removal, no heat!

3"x90" belt
4"x90" belt on KS490
8" contact wheel
Direct drive
Air tensioning
Versatile
Multi-position through vertical
Built-in vacuum (option)
3HP- 1PH or 3PH
Heavy-duty
40 lbs. Shop air needed
3"x24-1/2" steel reversible platen
6900 SFPM
view larger picture

KS390HV-5/ KS490HV, 3" and 4" Horizontal belt grinders 5 hp !!
Remove metal FAST with no heat! 8" Dia. contact wheel, 24" long platens! Keep dirt down!

5 HP, 3 PH belt sander (220/440V) - please specify
Horizontal only, 70 duro serrated contact wheel
Manual switch
Mounted on DCV-6 dust collector - 400 CFM
390 lbs
Model KS490HV-5 same as above, but with 4" belt
view larger picture

KS690HV, 6" wide belt grinder
Remove metal FAST with no heat!

6" Wide x 8" diameter 70 duro serrated contact wheel
6" x 24" platen for flat work
7200 SFPM
400 CFM vacuum base
Air belt tension, 0-55 PSI reqd.
Manual switch
Spark chute flips up for horizontal / vertical work.
Dimensions: W 18" x D 26" H 42"
5 HP, 3 PH TEFC motor (220/440V) - please specify
400 lbs.
view larger picture

<< BACK

Back to top

This web site is database driven and all content is inserted by Kalamazoo Industries, Inc.
If you have questions about the content on this web site please contact Kalamazoo Industries, Inc. .