KM10              10"  abrasive mitre saw Angles for 0 to 45 degrees - left or right. Positive index holes - up and down stops. Two cam-lock vises - lever-lock for table. Spindle speed 3450 rpm, 5/8" arbor Capacities: 1 1/2" solids, 2 1/2" shapes @ 45 degrees. Dimensions: L 25" x W 24" x H 17" 1 PH or 3 PH (Specify) 220 lbs. Options: WS10  workstop               12M steel stand Model: KM10-1   1 phase/220 volt            KM10-3   3 phase 220/440 volt view larger picture

KM14          14" diameter blade, abrasive mitre saw 14" saw, 5 HP , 1 phase or 3 phase Mitres either direction 45 degrees. Positive index holes and up/down stops spindle rpm 4400, manual switch w/overloads. Heavy duty stand, front table lock, dual cam vises. Capacities: 2 1/2" solids,3" pipe, 3.5" at 45 degrees. Dimensions: L26" x W24" x H 50", weight 400 lbs. Options: conveyors  ( see accessories page) Model: KM14-1  5 hp 1 ph 220 Model: KM14-3  5 hp 3 ph, 220/440 view larger picture

KM14SC  ,     14" dry cut mitre saw for steel Uses carbide tipped blade for clean cuts, no burr, no heat  !!!  Cut thin wall steel AND Aluminum!! Designed for light duty wall thicknesses of mild steel. 1/4" angle, pipe, structural steel. 1300 rpm spindle speed. 1" arbor, sealed ball bearings, dual V-belt drive,dual camlock vises, OSHA safety guard retracts when cutting. Uses carbide tipped blade  #14SC ( not included) Capacities: 4.5 " @ 90 degrees, 4" x 3.5" @ 45 degrees. Manual switch, cast iron construction. Dimensions: L26" x W24" x H 50"  Weight:  450 lbs. Model: KM14SC-1  5 hp 1 ph, 220 volt Model: KM14SC-3  5 hp  3 ph, 220/440 volt view larger picture

KM16-18     16" or 18" abrasive mitre saw Abrasive mitre saw with 10 HP, 3 PH motor. 220  or 440 volt. Please specify voltage.1" arbor Mitres either direction 45 degrees. Spindle speed 2500 rpm Two cam vises. Rugged cast iron arm and trunnion Capacities: @ 90 deg. 3" solids, 4 1/2" pipe/shapes, @ 45 2 1/2" solid,4" pipe. Low voltage manual starter with overloads. Wt: 650 lbs. Dry only, LESS wheel. Model: KM16-18  3 ph, 220/440 (please specify voltage when ordering) view larger picture

KM20-22      20" or 22" abrasive mitre saw Heavy duty cast iron and steel construction !!! Abrasive mitre saw with 15 HP or 20 HP, 3 PH motor, 220 or 440 volt. Please specify voltage. Capacities: 4" solid, 6" shapes@ 90 degrees, 3"solid, 5"shapes@ 45 degrees  Left OR Right !!  Magnetic starter , 24 volts @ pushbutton. Dual air operated chain vises standard.  Mitres left and right 45 deg.  1" spindle arbor. 2500 Spindle RPM  Less abrasive wheel.  Dry model shown. Wt: 1100 lbs Model: KM20-22    15 hp, 3 ph 220/440 (please specify voltage) Model: KM20-22     20 hp, 3 ph 220/440 ( please specify voltage) Wet model available: KM20-22W  As above  with pump and coolant tank, 15 hp, 3 ph 220/440  Dimension: 42"L x 51"W x 67"H   Weight:  1700 LBS. view larger picture

KM20-22V/15    20" or 22 " Mitre saw w/ Vacuum !!   20" Abrasive cut off saw with built in dust collector in base with hood. 15HP, 3ph motor.  Magnetic starter.  Dual air operated chain vise.  1" spindle, sealed ball bearings.  Mitres left and right 45 deg.  1200CFM dust collector.  Optional 20HP motor available. Capacities: 4" solids, 6" most shapes. At 45 deg : 3" solids, 5" most shapes. Dimensions: 52"L x 63"W x 68"H ,  1700 lbs. Model: KM20-22V-15 ,  15 hp , 3 ph , 220/440 Model: KM20-22V-20  ,  20 hp, 3 ph, 220/440 view larger picture

KM26    26" abrasive mitre saw 20 hp, 3 phase 220/440 volt, TEFC motor, Mag.starter Mitres 45 degrees to RIGHT Capacities: 9" @ 90 deg, 6" @ 45 degrees Cog belt drive, heavy steel safety guard, Air chain Vise 1" arbor, 7" dia. wheel flanges, spindle speed 1800 RPM Weight: 1800 lbs. Model: KM26D  26" wheel DRY Model: KM26W 26" wheel WET (as shown)  view larger picture