Non-ferrous Saws

Page Nine Text

HSM14 14" semi-auto Aluminum saw
14" high speed mitre saw for cutting ALUMINUM and other non-ferrous material with steel blade.
5HP, 3ph, 3450rpm motor.
4400 spindle speed. 1" spindle arbor
Power down feed. Air over oil 0-12 FPM. Semi-automatic
Double v-belt drive. Cast iron contruction!
Double air vises, OSHA safety blade guard.
Mitres left and right to 45deg.
Vise opens to 6"
Capacities: 4-1/2" pipe and square.
Dimensions: 30"L x 48"W x 60"H MADE IN USA !!
750 lbs.
Model: HSM-14 5 hp, 3 ph, 220/440 volt ( specify voltage)
view larger picture

KM14HS 14" manual Mitre aluminum saw

14" high speed non-ferrous mitre saw ( LESS BLADE)
Mitres 45 deg. left or right, cast iron construction.
4400 rpm spindle speed, sealed ball bearings, dual V-belt drive.
dual cam vises, OSHA safety blade guard.
Capacities: 4.5" @ 90 deg, 4" x 3.5" @ 45 degrees
Manual switch, 450 lbs

Model: KM14HS-1 5 hp.1 ph, 220 volt
Model" KM14HS-3 5 hp, 3 ph, 220/440 ( specify voltages)
view larger picture

HS14 14" Blade for Aluminum/Brass/Plastic

HS14DC 14" Dry Cut for Aluminum AND light Gauge Steel !!!!
uses carbide tipped dry cut blade for cutting both materials!!
Good for angle up to 1/4" thick ...will also cut aluminum !!

14" Non-ferrous straight cut saw for cutting ALUMINUM and other non-ferrous materials.
5HP, 3ph 220/440 volt motor.
3450RPM motor, 4400 spindle speed.
Cast iron base, trunnion and arm.
OSHA safety clamshell wheel guard.
Manual switch.
1" spindle, sealed ball bearings
Two easy-set screw vises to hold work on both sides. Opens 5"
Capacities: 4" square, round and shapes. 3" solids.
Options: PH-14 power down feed
              #12L steel stand
               AV-18 air vises
240 lbs.
Model: HS14-1   5 hp ,1 ph, 220 volt 60 hz.
Model: HS14-3   5 hp , 3 ph, 220/440 volt 60 hz
Model: HS14DC 5 hp , 3 ph 220/440 volt 60 hz 1300RPM @ spindle.

view larger picture

KDM14

14" non-ferrous double head mitre saw.
Semi-automatic, air/oil power downfeed.
1" arbor, Min. cut length 16", Max. cut 12'
Various lengths available please inquire.
5HP, 3PH 220 or 440 volt
Model: KDM14HS
view larger picture

HS14AS

12-14" blade
Non-ferrous arm assembly
5 hp
1 ph (220/440 volt 60 hz)
OSHA guard for carbide blades
1" arbor
Spindle RPM 4400
4 bolt mount
Manual switch
Please specify voltage
Weight: 240 lbs

view larger picture

HS14ASPH

12-14" blade
Non-ferrous arm assembly
Semi-automatic
Air/oil down feed
1 ph (220/440 volt 60 hz)
OSHA guard for carbide blades
1" arbor
Spindle RPM 4400
4 bolt mount
Manual switch
Please specify voltage
Weight: 240 lbs

view larger picture

This web site is database driven and all content is inserted by Kalamazoo Industries, Inc.
If you have questions about the content on this web site please contact Kalamazoo Industries, Inc. .